Product images shown on our website are for illustrative purposes only and they may vary in size and colour. Where colour is critical, we can provide a physical sample.
Type 1 Recycled
Description
A sub-base produced from recycled aggregate ranging between 0mm to-32mm
Typical Uses
-
Used to create an easily compacted load bearing non-permeable sub-base and back fill i.e. roads, paths, driveways, car parks and structural bases
-
Typical use is as a finished surface prior to a top coating of asphalt, concrete, shingle and block paving
Contact Us
​Useful Information
-
An evenly graded mixture which interlocks when compacted to ensure minimal voids and provide excellent load bearing qualities
-
Should be non-frost susceptible when used within 450mm of the finished surface, and has a maximum permitted top size of 63mm, graded down to dust
-
Unlike primary materials a recycled product will have an allowed level of contamination by weight, this can be wood, metal, plastic, ceramic, glass etc. Due to this fact we must make sure that recycled material is not the finished surface
-
If not conditioned with water the material will not compact properly